Loading...

Visit us at Woodworking Machinery & Supply Expo, Toronto, ON, 2 - 4 Nov Read more

Banner foot B751 eng

The product in the picture may feature optional equipment.

The PH260 - Precision, Power, and Capacity

This Industrial Quality Planer/Moulder can Transform Your Operation

 

ph260_illustration_default

Planes and moulds all four sides in one single operation.

With the PH260 you can take sawn lumber and simply turn it into a profitable finished product. The PH260 planes and moulds 4 sides at once. You can quickly and easily produce all imaginable standard and custom-made mouldings (t&g, ship lap, casings, crowns etc). As it is easy to reset the cutters, the PH260 is also perfect for short customized series.

Superior Finish

The quality you get with a board that is machined in Logosol’s planer/moulder equals the quality by any other machine on the market. Other than the very high cost associated with other machines that produce high-end finished products, the only other difference is speed. While some other machines are faster, the 1200+ linear feet per hour (400 m/hour) that the PH260 produces is more than capable of keeping up with your highest demand jobs.

 

The PH260 is different from traditional multi-cutter planers due to the top cutter and bottom cutter being suspended on both ends of the cutter shaft. Due to this, the machine is extremely stable, even though it has considerably wider cutters than most large planer/moulders. The machine table, where the bottom cutter and the side cutters are fitted, is made of heavy cast iron. The machine chassis is made of 5/32” (4 mm) sheet steel.

Produce Deep Mouldings

Our cutters can handle sizeable depths. This makes it possible to cut deep and beautiful patterns. The top cutter can plane to a depth of 5/16” (8 mm), plus the moulding depth, in one single operation, and the side cutters can cut even deeper.

A Wide Range of Mouldings

The PH260 can handle everything from quarter round to wide plank t&g flooring. You can choose from a wide range of standard moulding knives or order your own custom-made knives.

Adaptable to Other Cutter Heads

When delivered, the planer/moulder is ready for 4-side planing. It is set up with HSS planing knives in the top and bottom cutters, and 2” (50 mm) HSS planing knives in the side cutters. The 1 3/16” (30 mm) spindle diameter of the side cutters enables you to choose from a number of other specialized cutter systems that are available on the market today. Spacers shipped with the PH260 will adapt the side spindles to accept 1 ¼” shaper heads.

Our Customers

Many of our customers only have their PH260 for personal use. Even more of them combine this with selling the finished products or offering subcontract work on a limited scale. It does not require many hours of paid planing/moulding per year to cover the annual cost of a PH260. The largest customer group consists of small businesses in the wood processing field.

 


 

BEST AT SMALL-SCALE WOOD PROCESSING!

Logosol’s planer/moulder PH260 is especially developed for small-scale wood processing. It is economical, and in most cases it is better suited for a small business than is a large, second-hand industrial machine. An investment in a PH260 often leads to a dramatic increase in profitability for companies that try to make a living from sawing on a small scale.

bengt-olov

Bengt-Olov Byström,

Founder of LOGOSOL

 

 

 


 

Technical Data

4-sided
Planing/Moulding

Width:

15-260 mm (5/8-10 1/4")

Height:

10-100 mm (7/16-3 15/16")

2-sided
Planing/Moulding

Width:

Up to 300 mm (11 7/8")

Height:

10-230 mm (7/16-9")

Upper Cutter
Planing/Moulding

Width:

Up to 410 mm (16 3/16")
Height:

10-230 mm (7/16"-9")

Upper Horizontal
Cutter

Diameter:

72 mm (2 7/8")
Width:

410 mm (16 3/16")
Continuous output:

4 kW (5 hp)
Number of rev.:

6000 rpm (50 Hz)

7000 rpm (60 Hz)

Max. take-off, planing:

8 mm (3/8")
Max. take-off, moulding:

20 mm (3/4")

Lower Horizontal
Cutter

Diameter:

72 mm (2 7/8")
Width:

300 mm (11 7/8")
Continuous output:

3 kW (4 hp)
Number of rev.:

6000 rpm (50 Hz)

7000 rpm (60 Hz)
Take-off, planing:

0-4 mm (0-3/16")

Max. take-off, moulding:

5 mm (1/4")

Side
Cutters

Spindle axle diameter:

30 mm (1 3/16")
Max. cutter height:

100 mm (3 15/16")
Max. cutter diameter:

140 mm (5 9/16")
Continuous output:

3 kW (4 hp)
Number of rev.:

6000 rpm (50 Hz)

7000 rpm (60 Hz)

Max. cutting depth:

30 mm (1 3/16")

Only with properly sized tooling.

Included Side Cutter Heads and Knives

 

Two TB90 side cutter heads and four 50 mm (2") wide planing knives included.

Cutter diameter:

90 mm (3 9/16")
Cutter height:

40 mm (1 5/8")

Feed
System

Feed rollers:

5 feed rollers - 4 metal, 1 Polyurethane

Transmission:

Chain driven direct drive with variable feeding speed.

Feed rate:

Standard: 2-12 m/min (11-52 ft/min)

Continuous output:

0.18 kW (0.25 hp)
Electrical 
System

Moisture protected, IP54
Total continuous output:

13.2 kW (17.3 hp)
Electricity supply:

3-phase, 220V, 50 A and
1-phase, 220V, 50 A 

Size and Weight

Length:

1100 mm (43")

Width:

900 mm (35")
Height:

970 mm (38")
Weight:

350 kg (772 lbs)

 

 


 

  • 30 mm (1 3/16") spindle axles, a wide range of moulding knives. Mounting only takes 10-20 minutes.
  • Easy setting with userfriendly scales.
  • Rust proof for outdoor use and minimal maintenance.
  • Ability to start each of the five motors separately.
  • Clear plastic window makes it easy to supervise the process.
  • 6000 rpm ensures a smooth surface finish.
  • Low-friction inlay in the machine table ensures problem-free feeding.
neutral

60 Day Money Back Guarantee

We give you a 60 day money back guarantee on all machines. You have two months to decide whether the machine suits you. Cutting equipment, planing and moulding knives and other consumable items are not included in the money back guarantee.

neutral

Two-Year Warranty

We provide you a two-year warranty on all new machines. It covers manufacturing defects and problems that have occured during normal use of the machines, with the exception of consumable items such as belts, guide bars and chains.

neutral

Fast deliveries

Most orders are supplied directly from our stock. During peak season delivery times may be slightly longer. The delivery times for accessories and spare parts are always very short.

neutral

Unlimited support

Unlimited support when it comes to product knowledge and use of products.

neutral

20-years of Hands-On Experience

 

We have 20 years of hands-on experience designing and working directly with Logosol equipment.

neutral

Personal service

To us, offering a first-rate personal service comes natural.

Art. no.
Description
Price (Excl. Tax)
7514-000-0030
Logosol PH260, 1-phase, incl. Adjustable Feeding 2-12 m/min
$16,999.99
7514-000-0025
Logosol PH260, 3-phase, incl. Adjustable Feeding 2-12 m/min
$16,999.99
7514-555-0025
Logosol PH260, 3-phase, incl. Adjustable Feeding 2-12 m/min - Ready to start
$23,879.92
7514-555-0030
Logosol PH260, 1-phase, incl. Adjustable Feeding 2-12 m/min - Ready to start
$23,879.92

banner order product catalog uk 20120626

Logosol is represented in Canada by Silvana Import Trading Inc. Silvana was started in 1989 and has been involved in the forestry/wood processing sector since then. The product range today includes nursery and reforestation equipment (scarifiers, planters and seeders), small-scale harvesting equipment, sharpening robots, bioenergy solutions such as mobile chippers and pellet presses, and various other products for the wood processing sector such as Logosol´s product line.
To read more about Silvana, click here

SILVANA Import Trading Inc. | 4269 St. Catherine West, Suite 304, Montreal, Quebec Canada H3Z 1P7 | Telephone: +1-514-939-3523, +1-888-939-3523 | Fax: +1-514-939-3863 |