Loading...

Stack Cutter PK1500

Cut board stacks cost-effectively - with impressive precision.

The stack cutter cross-cuts board stacks with great accuracy. The 150 cm, 135 cm or 120 cm (59", 53" or 47") long guide bar is steered by the bar nose holder. The chain is a standard 3/8” cross-cut chain driven by our powerful 5 kW (7 hp), 3-phase electric motor E5000. In line with Logosol’s philosophy, we have examined a function that earlier cost a fortune to accomplish, and produced a smaller and lighter solution. In this case a stack cutter that takes the cut linearly vertically, a feature that normally only is found in larger industrial machines. The advantages of cutting linearly is that the capacity significantly increases both as regards sawing speed and the size of the board stack. Logosol’s stack cutter has a relatively low weight since it is mainly made of aluminium. Three large wheels make it easy to move the machine by hand. One of the wheels is adjustable in height, and with the help of fixed sigths the cut can be aligned. With the stack cutter comes a 2 m (6 ft 7") long measuring rod, which is a good means of measuring the length of the stack.

Cut time

Why spending time cutting the boards one by one? With Logosol’s stack cutter you cut the entire board stack at once. Just adjust it to the desired length and then let the stack cutter do the job, quickly and efficiently. What used to take a whole day can now be done in half an hour; what used to take an entire week you can accomplish in half a day. It is easy, it is fun and you can spare time for doing other things.

Cut costs

If you regularly cut large amounts of lumber into length, the easiest way is to do it with a stack cutter. It saves time. You are also spared from monotonous tasks that strain your body. Logosol’s mobile stack cutter does not take up a great deal of room, and by quickly cutting the stacks so that they are more easy to handle, you will save even more space. As Logosol’s stack cutter is such a small investment, it will be profitable already when cutting small volumes 

Cut accurately

With Logosol’s stack cutter you can cut your board stacks with an accuracy down to +/- 2 mm (1/16"). This is due to our portal technique, where the guide bar is fitted at both ends. The accuracy is significantly better than comparable stack cutters that have turnable guide bars, i.e. radial cutting. 

Simple installation

There is no need for a special installation. The stack cutter is ready for use on delivery. Thanks to the low weight, it is easy to roll in place over the stack to be cut. The stack does not have to lie completely level as the stack cutter can be adjusted to the correct angle. Line up the cut, set the stack cutter, push the start button and let the guide bar sink down through the boards.

 


 

Technical data

Working measurements

Maximum board stack for Stack Cutter 1500: 
Max. width:  1442 mm (57")
Max. height:  1450 mm (57")

Dimensions

Stack Cutter outer measurements.
Length:  2600 mm (102")
Width:  1100 mm (43")
Height:  1900 mm (75")

Electrical system and motor

The electric motor is a, specially wound, motor with a rated output of 5kW (7 hp). While cutting, the motor load is 7-8 kW. It is protected by a temperature sensor. 
Total continous output: 5 kW (7 hp)
Electricity supply: 3-Phase, 400 V, 16 A

Also available as 3-phase, 220 V, 30 A
Insulation class: IP54
This insulation class means that the motor and the entire electrical system are unaffected by sprinkling water, thus capable of standing outdoors in the rain.

Sound level and ergonomics

The Stack Cutter 1500 is designed to provide the user with the best possible working conditions. The controls are positioned at work height and a Plexiglas sheet protects the operator against any flying chips. The sound level requires hearing protection.

Acoustic pressure: 102,0 dB (A) 
Acoustic power: 113,0 db (A) 
Vibrations in the controls:
Very slight

Cutting equipment

Logosol has a deep experience with different cutting machines and have chosen a standard 3/8” cross-cutting chain for the Stack Cutter. 
Chain pitch: 3/8"  
Chain speed: 22,5 m/s (78 ft/s)

Chip handling

The Stack Cutter works perfectly well without any sawdust transport equipment. However, since this will create considerable quantities of sawdust on the work site, a chip and sawdust extractor is recommended.

A simple accessory chip and sawdust extractor for the Stack Cutter 1500 is available to be fitted on the Stack Cutter support legs. Connecting the Stack Cutter to existing chip and sawdust evacuation systems works equally well.
Sawdust outlet (connection for flexi-hose): 100 mm (3 15/16”)
Min. chip extractor capacity needed: 700 m3/h (24500 cubic ft per hour)


  • Lightweight and sturdy structure constructed from aluminium beams - 100% anticorrosion protection.
  • Levelling sight assures precise alignment of sawing line.
  • Capable of sawing stacks up to 1.5 m x 1.5 m (5 ft x 5 ft). Precision +/-2 mm (1/16").
  • Automatic saw lubrication by means of large transparent oil reservoir.
  • Maximum motor power 10 kW (14 hp).
  • Large wheels for easy movement.
  • Crank operated vertical angle adjustment.
  • Crank operated lifting and lowering of the saw unit.
  • Levelling arm to position the kerf.
  • Sawdust collection channel 4" (100 mm).
neutral

60 Day Money Back Guarantee

We give you a 60 day money back guarantee on all machines. You have two months to decide whether the machine suits you. Cutting equipment, planing and moulding knives and other consumable items are not included in the money back guarantee.

neutral

Two-Year Warranty

We provide you a two-year warranty on all new machines. It covers manufacturing defects and problems that have occured during normal use of the machines, with the exception of consumable items such as belts, guide bars and chains.

neutral

Fast deliveries

Most orders are supplied directly from our stock. During peak season delivery times may be slightly longer. The delivery times for accessories and spare parts are always very short.

neutral

Unlimited support

Unlimited support when it comes to product knowledge and use of products.

neutral

20-years of Hands-On Experience

 

We have 20 years of hands-on experience designing and working directly with Logosol equipment.

neutral

Personal service

To us, offering a first-rate personal service comes natural.

Art. no.
Description
Price (Excl. Tax)
Logosol is represented in Canada by Silvana Import Trading Inc. Silvana was started in 1989 and has been involved in the forestry/wood processing sector since then. The product range today includes nursery and reforestation equipment (scarifiers, planters and seeders), small-scale harvesting equipment, sharpening robots, bioenergy solutions such as mobile chippers and pellet presses, and various other products for the wood processing sector such as Logosol´s product line.
To read more about Silvana, click here

SILVANA Import Trading Inc. | 4269 St. Catherine West, Suite 304, Montreal, Quebec Canada H3Z 1P7 | Telephone: +1-514-939-3523, +1-888-939-3523 | Fax: +1-514-939-3863 |