Big Mill Pro

Photo

Big Mill Pro
- The package that can do it all.

Components: 1 Big Mill BASIC, 1 extra Big Mill Timberjig, 1 extra guide rail 2.75 m, 1 LSG kit, 2 Arm EXT 90 cm or 120 cm, 2 Fixing Plates EXT, 1 Rack and T-Bar EXT kit.

Log Diameter: 135 cm; with guide rail steering 105 cm.

The complete system for cutting valuable, oversized and hard-to-move logs professionally.

With Big Mill PRO you can saw with high precision. You can take wide, millimetre-accurate cuts through the whole length of the log. The system includes a Big Mill LSG with its two Timberjigs, the mounts from Big Mill BASIC, extended Arms that hold the two guide rails on either side of the log, and two extra, sturdier fixing plates for the log ends.
Due to the guide rails, you can easily cut perfect boards all the way down to the centre of the log. After that you can use LSG without guide rails, since you then have a wide and perfectly level surface that guides the cut. You can also continue to use the guide rails if you rotate the log half a turn and cut it from the other direction. The guide rails can be rotated around the log in fixed 90 degree steps, and raising and lowering are also done in fixed, accurate steps. This enables you to saw edged boards, if desired. The double guide rails can also be fitted together to cut twice the length with the Timberjig. In brief, you can attain almost everything with the Big Mill PRO package.
When placing your order, state which guide bar length you want to have for your LSG, 90 cm (35”) or 120 cm (47”), in order to get the correct length of the Arms EXT for the guide rails.

Worth Knowing about Big Mill System

• Cut as short logs as possible, and you will get better precision and the work will be easier. The aluminium guide rails can be fitted together and extended when required. They are available in the length of 0.5 m, 1m, and 2.75m (1.6 ft, 3.3 ft, and 9 ft).

• When the guide rail is over 4 m (13 ft) long, a guide rail prop should be fitted at the middle of the log; when it is over 7 m (22 ft) long, two guide rail props should be used.

• If you want to upgrade your sawing, the Timberjig and guide rails of Big Mill System are compatible with the Logosol Sawmill and Woodworker’s Mill.

• The packages are composed to give you what you need, but all components in the system can also be ordered separately.

• More information about all the possibilities, components and accessories of the system, are described in the manual.

• We can provide you with a chainsaw, guide bar, and chains that are suited for sawing logs, but you can just as well use standard equipment if you already have a chainsaw with two bar bolts.

• Sawing is great fun! The feeling when holding your first board is hard to beat.