|
XY-table
The table is mounted on the sliding carriage giving X,Y movements to mortiser or router. The table is built on ball bearings and therefore it can be operated with one handle giving fully articulated movement. It has two stops along the sliding carriage and one stop ³feeding into the cutter². On the inner side you can mount a moulding template for curved mouldings. A bar is provided for the clamp. The clamp can be mounted in 6 different positions on the table. Table size 500 x 340 mm. Height over sliding table 34 mm.
Router spindle.
This is a spindle for router bits, drilling bits, and other shanked tools from 6 to 20 mm. The spindle comes with one collet and chuck wrench. The following diameters 6, 8, 10, 12, 13, 16, and
20 mm collets are available. The collet can close up by 1 mm. For example 13 mm collet you can use to 13 mm, 1/2² and 12 mm shanks.
Guard for horizontal position
Guard and hood combined with 3 adjustable pressure bars. The guard can be used for moulding, tennoning and mortising. Max tool diameter 140 mm. For 100 mm hose. Guard for router spindle Guard and hood for vertical position with brush side and a adjustable window front. For 100 mm hose. Extra clamp
Larger pieces needs two clamps one extra for the sliding table or the XYtable.
Attachment for curved mouldings
Attachment built on following parts: Guard piece with pressure bar and 3 curved fences, radius 17, 35, and 50 mm. To be assembled on standard hood.
In- and out-feed table.
Size 500 x 150 mm. Manufactured in 4 mm steel plate.
Spindle 1 1/4²
Spindle for 1 1/4² tools.
Spindle short
For tools up to 40 mm height. Can be combined for M14 tool attachment. Extra clamping device for mounting on the sliding table.
Support table
To mounted on sliding table. Size 350 x 350 mm. Manufactured in 4 mm steel plate.
Power feeder
3 feed rollers with dia. 100 mm and width 50 mm, 8 speeds from 2,5 to 54 m/min. Electrical switch for high and low speed as well as forward and reverse. Motor 0,45 kW, 0,6 Hp. Weight 41 kg. Power supply for feeder Power supply on control panel. The feeder can be stopped and started from the panel.
|
