Technical data

- 4-sided moulding/planing
- Large Capacity - 10 1/4 X 4" on all 4 sides
- IP54 Certified
- 5 motors for precise control
- Small footprint - 43" X 35"
- Feeding system can handle boards with high moisture content
- Planed cast iron table
- Easily reset to next profile or dimension
- Ten Thermogaurds protect the machine
- Large selection of reasonably priced knives, profile knives, and cutters.
- 4 dust collector adapters - one for each cutter head
- Safety lock on overhead door
- Adjustable feeding speed 11 – 52 linear feet per minute.

Technical data
4-sided planing/moulding
Width:	0-10” (10 - 100 mm)
Height:	9/16”-4” (15 - 260 mm)
2-sided planing/moulding
Width:	12” (10 - 230 mm)
Height:	3/8”-9” (300 mm)
Planing
Planing width:	13” (330 mm)
Width:	3/8”-9” (10 - 230 mm)
Upper horizontal cutter
Diameter:	2 7/8” (72 mm)
Width:	16” (410 mm)
Effect:	3 kW (4hp)
Number of revolutions:	7000 rpm
Planing depth:	max. 5/16” (8 mm)
Moulding depth:	max. 3/8” (10 mm)
Lower horizontal cutter
Diameter:	2 7/8” (72 mm)
Width:	12” (300 mm)
Effect:	3 KW (4hp)
Number of revolutions:	7000 rpm
Planing depth:	0-3/32” (0-4 mm)
Moulding depth:	max. 5 mm
Side cutters
Spindle axle diameter:	1 3/32” (30 mm)
Cutter height:	max. 4 ” (100 mm)
Diameter:	max. 5 1/2” (140 mm)
Effect:	3 KW (4hp)
Number of revolutions:	7000 rpm
Cutting depth:	max. 1 3/32” (30 mm)
Included standard cutter heads
Type:	TB90 knife
Body Diameter:	3 1/2” (90mm)
Body height:	1 9/16” (40mm)
Planer knives HSS
Knife width:	2” (50 mm)
Feeding
Effect:	0,37 KW (0.5hp)
Feeding speed:	Standard 11-52 ft/min
Electric system 3-phase version
Moisture protected, IP54
Effect:	12.4 kW (16.5hp)
Electricity supply:	3-phase, 220 V, 30 A
Electric system 1-phase version
Moisture protected, IP54
Effect:	9.3 kW (12,5 hp)
Electricity supply:	1-phase, 220 V, 50 A
Measurements and Weight
Length, width:	43”x35” (1100 x 900 mm)
Height:	38” (970 mm)
Weight:	370 kg (820 lbs.)

Ability to start of each one of the five engines separately.   7000 rpm cutter speed contributes to smooth project surfaces.   Average productivity: 1300 Ft (400 meters) per hour.

Large windows on top of machine for prefect project viewing.   16A electrical connection.   Corrosion resistant for outdoors work.

30 mm axle spool. Wide assortment of cataloged profile knives. Knife exchange takes only 10 to 20 minutes.   Easy to set-up. High visibility scales with 0.1 mm spacing.